RGB LED Digital Ribbon Kit , Ribbon, DMX Decoder, 40W PS

This digital RGB LED flexible strip light kit with DMX to digital SPI decoder is a one of a kind product. The SPI decoder works by interpreting a DMX512 signal and outputting each DMX RGB address to a 4" section of 3 LEDs. Each 5m roll of flexible digital RGB LED ribbon has 50 controllable 3 LED sections including a TM1803 type IC chip. This allows for roughly 17 meters of ribbon or 170 IC chips to be controlled by one DMX to digital decoder. Each decoder is sold as a kit including one DMX to digital decoder /driver, one 5m roll of digital RGB LED ribbon, 12mm wide (no quick connectors for this product) and one 40W / 12VDC wall plug style constant voltage power supply with one 5.5 x 2.1mm male jack to bare lead wire connector. Additional 5m rolls of ribbon may be purchased separately (additional 40W / 12VDC constant voltage power supply included). This product is perfect for the most demanding of lighting designers; allowing for a single strip of digital ribbon to be performing several different functions among several different sections on the same strip of ribbon simultaneously! Create color chasing, knight rider, and random pulsing effects using a DMX controller (sold separately) and customized programming. The DMX decoder has 16 built in functions with 16 speed levels. For customized programming a DMX controller is required to send a DMX signal to the SPI decoder.