PDS-ZMG Glare Free Aluminum Extrusion - .87" Deep
![PDS-ZMG](https://cdn.commercev3.net/cdn.ecolocityled.com/images/uploads/EX-KL1-8GF-500.jpg)
![Dimensions](https://cdn.commercev3.net/cdn.ecolocityled.com/images/uploads/EX-KL1-8GF-d500.gif)
![Black Anodized](https://cdn.commercev3.net/cdn.ecolocityled.com/images/uploads/pds-zmg-03-500.jpg)
![Glare Free](https://cdn.commercev3.net/cdn.ecolocityled.com/images/uploads/PDS-ZMG_3_US-500.jpg)
![Beam Angle](https://cdn.commercev3.net/cdn.ecolocityled.com/images/uploads/pds-zmg-beam-500.gif)
![PDS-ZMG](https://cdn.commercev3.net/cdn.ecolocityled.com/images/uploads/EX-KL1-8GF-150.jpg)
![Dimensions](https://cdn.commercev3.net/cdn.ecolocityled.com/images/uploads/EX-KL1-8GF-d150.gif)
![Black Anodized](https://cdn.commercev3.net/cdn.ecolocityled.com/images/uploads/pds-zmg-03-150.jpg)
![Glare Free](https://cdn.commercev3.net/cdn.ecolocityled.com/images/uploads/PDS-ZMG_3_US-150.jpg)
![Beam Angle](https://cdn.commercev3.net/cdn.ecolocityled.com/images/uploads/pds-zmg-beam-150.gif)
SKU: EX-KL1-1GF
Description
The glare free PDS-ZMG strip light extrusion has extended flanges past the cover insert to block and conceal the light source so your eyes are not exposed to the brightest part of the fixture. The fixture minimizes glare without causing discomfort. There are multiple ways to mount this extrusion to create surface mount as well as hanging customized strip light fixtures. Each channel is sold separately from the cover and can fit up to a 10mm wide low voltage LED Strip. Channels are available in silver and black anodized finish, the black anodized has slightly less glare than the silver. These extrusions are also available in 2 meter lengths but you must call to order.
Specifications
SPECIFICATIONS | |
Model | PDS ZMG Aluminum Extrusion |
SKU | EX-KL1-1GF |
KLUS Ref: | C1418 |
Dimensions | 39.37"L x 0.65"W x 0.87"H |
Base Width | 0.55" |
Material | Aluminum |
Cover | Polycarbonate |
Mounting | Mounting Springs, Hanging Mounts |
Available Lengths | 1M, 2M |
Available Finishes | Anodized, Black Anodized |
Downloads
Click For Product Data Sheet |
Click For General Instructions |
Click For Installation Video |
Click for Cover Instruction |
![mounting instruction](/images/uploads/cover-k-snap-500.gif)
Reviews
Product Rating Based on 1 review |
Write a Review |
---|---|
|
|
High Quality Extrusion, Excellent Results Kerry Ancheta | Jun 2, 2022 Outdoor version with diffused cover, and paired with WAC Invisiled tape, which I found provides excellent dimming control. |