Color Changing Crown Molding Lighting using RGBW Strips
Description
Color changing 4in1 RGBW Strip sits atop crown molding to outline a game room with RGBW color controllable lighting. T4 Remote Control is used for color changing effects and has a wall mounted cradle for storing. 24VDC Power is required for the strip light, a 200W Mean Well brand was suffice for the load. This strip has RGB color changing strip as well as a warm white color output, so it can change color, also be just warm white, or any combination of both. If you want to know how to put color changing lights in your crown molding give us a call and we would be glad to help you with your project.
Reviews
|
Product Rating |
Write a Review |
|---|---|
|
|
|
|
- There are currently no reviews for this product
|
|
Questions
Similar Customer Projects
Man Cave Room Lighting with RGB Strip Lights
Color changing RGB LED Strip Lighting is used for man cave accent lighting. A RGB Zone Controller is being used to control two different sections of the lighting. The different zones gives the user the ability to change two areas of the lighting separately as well as control them at the same time. Power is being driven by a 12VDC Mean Well Power Supply. We prepared a basic wiring diagram for the customer to make the install simple and care free. He was ecstatic to see the new vibe of his man cave lighting and is ready to spend more time there. If you have a similar project feel free to give us a call and we would be happy to assist you.
12V RGB Spot Bulbs and RGBW Strip Lights are used to light up a Mantle
This unique little project was done using our 12 Volt DC Ribbon Star 50/50 RGB + Warm White LED Strip lights and RGB LED Spot bulbs. The color control is being operated by our T4 RGBW 8 Zone Controller Kit with two receivers, allowing the user to control the upper RGBW Strip Light section of the mantle separately from the lower RGB Spot Bulb section. The warm white output of the RGBW strip light can be controlled and dimmed separately from the color control of the RGB zones. The strip light is being housed in our KL2 type STOS ALU extrusion with clear K cover, and the RGB spot bulbs have been sunken into the mantle. Power is being driven through a 100W Mean Well Waterproof transformer. Although this project might look small it has the ability to output billions of color hues, perfect to fit any mood or special occasion.
Glare Free MICRO Channel is used to Create Sleek Hanging LED Pool Table Fixture
A 2 Meter length of MICRO Glare Free black extrusion is used to create a sleek and modern light fixture above a pool table. Supreme Daylight White 24V Strip light is taped inside of the extrusion. The strip is wired to a 60W 24VDC Power Supply which is hid in the ceiling above. We custom soldered the strip light with the wires coming out the backside. A small hole was then drilled in the back of the channel to allow the wire to come through seamlessly. If you are wanting to create a custom hanging pool table light fixture for your game area or man cave, give us a call we would be glad to help you get all the right pieces to complete the project.
Crown Molding LED Lighting using Warm White Strip Lights
Warm white crown molding accent lighting is achieved using our Ribbon Star Max LED Strip Lights. The strip lights were soldered into a long roll with power leads every 30ft. The required 12 volt power is being driven through 200W 12VDC Power Supplies. The power supplies are connected to multiple wireless control receivers that pair to the dimming remote of our Pro Dim 5 Kit. The high density of the strip light creates a smooth and even glow of accent lighting around the entire portion of crown molding, there are no visible dots or hot spots. The customer is extremely happy with the result and the warm white is a perfect color temp to create an inviting and relaxing living room atmosphere. If you have a similar project lighting crown molding give us a call and we would be happy to help you with your project.