(3) Ribbon Wire Ribbon Snap Connector for 50/50 10mm RGB LED Strips

Join two pieces of 10mm wide RGB strip lights using these 4 wire strip light jumper connectors with 5.25" of UL recognized 20AWG wire between each connection point. This connector can be used for going around corners or simply joining two cut pieces of low voltage RGB LED strip light. A small indentation on the top of the connector makes it suitable for both high and low density RGB LED strip lights. These connectors are easy to use and hold tight on the strip for a secure connection. Keep in mind that these connectors are 0.5" wide and 0.2" tall, so they may not fit inside some aluminum strip light channels. Be sure to check the width of your channel if you plan on using the two together. Polarity may vary between strip lights so be sure to check the polarity on the strip when connecting, most strip lights will be marked on the PCB every 1/2 meters.